http://www.desmid.com/excavator-bucket/
Introduction of hydraulic excavators operating procedures
Hydraulic excavator is the most prosperous production and marketing of construction machinery products, but many users do not have the proper use of hydraulic excavators, resulting in damage to the machine due to operator error. Technical staff said that the manipulator must be clearly aware of hydraulic excavators operating procedures to avoid unnecessary mistakes led to the operation of machine maintenance.
Hydraulic excavator operations before the technical preparations for
1) engine parts, according to general operating procedures of the relevant regulations.
2) the engine before starting or operating signal.
3) Check for any leaks in the hydraulic system; tire excavator should check their tires is intact, pressure for compliance; check gear, brake systems, rotary institutions and instruments, meters, and after commissioning, verify that the rear to allow the normal access to job status.
4) Learn more about the construction task and the situation. Check the soil solid excavator downtime and stability, Wheeled excavators should be added support to maintain its stable and reliable. Check road cutting and trench stability of the slope to prevent the excavator overturning.
5) any person is prohibited areas remain operational areas in the excavator. To prohibit access to the cab.
6) dump truck excavator operating on-site access roads should be.
Hydraulic excavator operations and moving the technical requirements
1) The excavator operator was to prohibit any persons who, under the excavator and delivery of goods, while not allowed to work while maintenance; not arbitrarily adjust the engine (speed controller), and the hydraulic system, electrical control system; should pay attention to the selection and creation of a sound Operating face, dig hole digging is strictly prohibited.
2) The headway ran excavator dump truck after unloading should be carried out; unloading dump truck when the collision without any part of the case, should reduce the daytime bucket height; cut across the top of the bucket from the dump truck cab.
3) prohibits the use of bucket crushed solid objects; in case of large stones or hard objects, should continue after removal operations; prohibiting excavation indicated by five or more blasting rock.
4) prohibiting the excavator deployed in the upper and lower two mining operations within the same paragraph; excavators move within the working surface should be flat on the ground first, and clear the channel of obstructions.
5) prohibit the use of bucket cylinder jack up the whole way out excavators. Excavator bucket did not leave the ground can not be transverse or rotational movement moving.
6) prohibit the use of excavator boom horizontal drag otherness; hydraulic excavator mining methods can not be hit.
7) The excavator in making rotary movement, can not turn the handle to the opposite direction operation.
the driver should always pay attention to the functioning of excavators found abnormal should immediately stop checks, and timely troubleshooting.
9) In the excavator operation, run the process, should always check the hydraulic oil temperature are normal.
10) Excavator in the case of running wires, cross Road, bridges and culverts, the understanding of the situation after the adoption, if necessary, set up hand command; excavator and a high-wire distance of not less than 5m; should be avoided whenever possible to walk backwards.
11) Excavator run-time of its boom should be parallel with the running gear, turntables should be locking, bucket of about 1m from the ground. Downhill running low profile should be used to prohibit sliding off stalls.
12) Excavator routes should be with the slope, ditches, pit to maintain sufficient distance to ensure safety; cross sections should be soft and uniform use of low-grade road, if necessary, the use of wood, stones, etc. to be foreshadowing.
Hydraulic excavator operation after the technical work
1) The excavator shall be parked in the flat, solid, without prejudice to the traffic areas and implementation of reverse gear mounted parking brake. When necessary, such as the parking ramp, its running gear front and rear pad set Wedge.
2) regularized fuselage, bucket floor, working the joystick device placed in the position, locking windows and doors before the driver left after the excavator.
3) according to the warranty statutes, to carry out routine maintenance of excavators.
Get more excavator and construction machinery information,please visit: http://www.minibulldozer.net
About the Author
HowStuffWorks Videos Mega Excavators Bucket Wheel Excavators
|
|
Excavator / Backhoe Operator’s Crossbones Decal cat or deer controls dig bucket $2.98 |
|
|
Replacement Bucket Cylinder Oil Seal Ring Kit for Carter E320B Excavator $50.03 |
|
|
Repalcement Bucket Cylinder Oil Seal Kit for Hitachi EX200-5 Excavator $49.12 |
|
|
caterpillar excavator buckets 322 quick connect $700.00 |
|
|
707-99-37150 New Komatsu Excavator PC160LC-7 Bucket Cylinder Seal Kit $93.99 |
|
|
Hensley Excavator Bucket T-400 Tiger Tooth $37.50 |
|
|
4485614 New John Deere Excavator Bucket Cylinder Seal Kit 230C LC $73.96 |
|
|
2000 30″ Excavator Trenching Bucket $1,995.00 |
|
|
Hensley Excavator Bucket T-290 Tiger Tooth $25.30 |
|
|
Hensley Excavator Bucket X295 Standard Tooth $30.94 |
|
|
Hensley Excavator Bucket X335 Dirt Tooth $36.95 |
|
|
Bobcat Excavator / Backhoe bucket $350.00 |
|
|
IHI 28N2 Mini Excavator,6200 Lbs,Digs 8.3″,18″ Bucket,Quick Coupler,2006,2196 Hr $9,999.00 |
|
|
HITATCHI EX 270-LC EXCAVATOR DIG BUCKET $1,500.00 |
|
|
Hensley Excavator Bucket X450 Dirt Tooth $65.55 |
|
|
Lego Technic – Digger Bucket Excavator JCB Big Large Black Shovel – 18×10 – NEW $3.15 |
|
|
36″ Excavator Bucket fits PC150 and by Hensley $3,200.00 |
|
|
Hensley Excavator Bucket X500T Tiger Tooth $125.00 |
|
|
2438U915R110 New Kobelco Excavator Bucket Cylinder Seal Kit K907D w/ 120 mm Bore $95.75 |
|
|
AT130602 New John Deere Excavator Bucket Cylinder Seal Kit 290D $71.23 |
|
|
2438U915R100 Kobelco Excavator Bucket Cylinder Seal Kit K907D Rod 75 mm $47.46 |
|
|
AT191403 John Deere Excavator Bucket Cylinder Seal Kit 27ZTS 27CZTS 35ZTS 35CZTS $65.98 |
|
|
NEW Quickhitch Excavator Buckets CAT 330D/336D Made Of Pewter $25.00 |
|
|
KUBOTA KX 41-2 EXCAVATOR BUCKET PINS – NEW CONDITION – WITH ZERTS $7.00 |
|
|
Kubota K7978 Used 18″ Quick Attach Bucket Fits Kubota U25 Excavator $775.00 |
|
|
Hydraulic Ajusta Buckets sales literature excavator $9.00 |
|
|
Repair Bucket Cylinder Oil Seal Ring Set for Hitachi EX200-5 Excavator $49.14 |
|
|
C&P Used 18″ Pin On Bucket to Fit New Holland EH27B Excavator $810.00 |
|
|
2008 Kubota KX-161-3 cab excavator has 4 way blade & 24″ bucket w/ Hydr Thumb $51,900.00 |
|
|
New Holland Used 18″ Pin On Bucket to Fit New Holland EC25 Excavator $495.00 |
|
|
Heavy Duty 42″ Komatsu PC600 Excavator Bucket $5,295.00 |
|
|
18″ Hitachi EX450 Excavator Trenching Bucket $5,750.00 |
|
|
Large Heavy Duty Steel Bucket For Excavator,or Other Machine $500.00 |
|
|
68511-91110 New Kubota Excavator Arm / Bucket Boom Cylinder Seal Kit KH-41 $23.40 |
|
|
CAD Design for Excavator Bucket $2,000.00 |
|
|
New 42″ Caterpillar 330 D Linkage Excavator Bucket $3,950.00 |
|
|
Komatsu PC220-2 Excavator 1984, 8900 hours, 2 Buckets, New Pexiglass & Paint $16,900.00 |
|
|
1057253 Caterpillar New Cat Excavator Bucket Cylinder Seal Kit 307 307B 308B $91.75 |
|
|
Hensley T310 Excavator Bucket Tooth (new) $25.00 |
|
|
Hensley T370 Excavator Bucket Tooth (new) $59.00 |
|
|
STUMP SAW – GRINDER for 3 to 10,000 lb mini excavator or skid steer bucket mount $1,250.00 |
|
|
NEW HENSLEY BUCKET TEETH T 24 TIGER EXCAVATOR BUCKET FREE SHIPPING $32.99 |
|
|
Tomy Tomica Long 140 KAWASAKI HEAVY INDUSTRIES BUCKET WHEEL EXCAVATOR 1/350 $11.80 |
|
|
Kubota K7867 Used 18″ Pin On Bucket to Fit Kubota KX61-2 Excavator $795.00 |
|
|
Esco Excavator Bucket Wrench $8.99 |
|
|
Excavator Bucket 52″ Wide $2,500.00 |
|
|
BOBCAT 329 EXCAVATOR 4 TON DIGGER STEEL TRACKS BUCKET KUBOTA DIESEL $26,995.00 |
|
|
6803268 Bobcat Excavator Clamp Arm Bucket Cylinder Seal Kit 331 331E 334 X-325 $15.44 |
|
|
EACO 42 INCH EXCAVATOR BUCKET HEAVY DUTY EX ZX 450 400 $3,250.00 |
|
|
Brand New 30″ Kobelco SK 120 Excavator Bucket $1,797.00 |
|
|
9020B Case Excavator Bucket $1,000.00 |
|
|
12″ Bucket for Gehl 753Z Excavator $500.00 |
|
|
New 9″ Gannon HDM15 Mini-Excavator Bucket $600.00 |
|
|
UNUSED JOHN DEERE 24″ TOOTH BUCKET! FOR EXCAVATOR / BACKHOE 7.5 CU. FT CAPACITY! $849.99 |
|
|
Excavator Sorting Bucket $1,900.00 |
|
|
JCB PARTS 3CX Seal Kit , Rear Bucket Ram $20.39 |
|
|
Bucket Cylinder Oil Seal Ring Kit for Komatsu PC200-6 Excavator $50.33 |
|
|
Bucket Cylinder Oil Seal Ring Kit for Hitachi EX200-5 Excavator $48.92 |
|
|
Repair Bucket Cylinder Oil Seal Ring Set for Hitachi EX200-5 Excavator $48.94 |
|
|
Repalcement Bucket Cylinder Oil Seal Kit for Komatsu PC200-6 Excavator $50.31 |
|
|
john deere jd50 mini excavator bobcat bucket ext stick $39,900.00 |
|
|
Bucket Cylinder Oil Seal Ring Repair Set for Carter E320B Excavator $50.01 |
|
|
Bucket Cylinder Oil Seal Ring Repair Set for Carter E320B Excavator $50.14 |
|
|
C&P 54″ HEAVY DUTY BUCKET DEERE HITACHI 330 LC 350LC EXCAVATOR TRACKHOE (029) $2,500.00 |
|
|
Excavator BUCKET Heavy Duty 27 Inch Wide Werk Brau $750.00 |
|
|
1 x Australian old postcard – QLD – Moronbah bucket wheel excavator $5.50 |
|
|
New 54″ Caterpillar 345 F Linkage Excavator Bucket $5,550.00 |
|
|
Repair Bucket Cylinder Oil Seal Ring Set for Hitachi EX200-5 Excavator $49.13 |
|
|
PSM JD350 24″ WIDE BUCKET, EXCAVATOR, DITCHING, BACKHOE, TRENCHING, ROAD BUILDER $3,000.00 |
|
|
50″ Excavator Bucket $3,800.00 |
|
|
Bucket Cylinder Oil Seal Ring Kit for Carter E320B Excavator $49.41 |
|
|
MINI BACKHOE, MINI EXCAVATOR, TRENCH DIGGER,NEW! 9″+24″BUCKET, FREE SHIPPING $3,649.00 |
|
|
Bucket Cylinder Oil Seal Ring Kit for Carter E320B Excavator $50.15 |
|
|
Bucket Cylinder Oil Seal Ring Repair Set for Carter E320B Excavator $50.15 |
|
|
BUCKET JOHN DEERE HITACHI QUICK COUPLER EXCAVATOR $4,200.00 |
|
|
707-99-58090 New Komatsu Excavator Bucket Cylinder Seal Kit PC300-7 PC300LC-7 ++ $181.99 |
|
|
Bucket Cylinder Oil Seal Ring Kit for Komatsu PC200-6 Excavator $50.32 |
|
|
Bucket Cylinder Oil Seal Ring Kit for Hitachi EX200-5 Excavator $48.66 |
|
|
ERTL JOHN DEERE FRONT END EXCAVATOR w STEERING SEPR LEVER LIFT & HALF TON BUCKET $13.99 |
|
|
NICE! UNUSED CP 24″ QUICK HITCH EXCAVATOR TOOTH BUCKET! $1,250.00 |
|
|
MINI WHEELED T174 EXCAVATOR w/ CLAM SHELL BUCKET & MAGNET / ASSEMBLED HO Scale $49.95 |
|
|
MINI TRACKED EXCAVATOR CRAWLER w/ BUCKET / BLADE & CONSTRUCTION HAMMER HO Scale $34.95 |
|
|
Bucket Cylinder Oil Seal Ring Kit for Hitachi EX200-5 Excavator $49.12 |
|
|
Bucket Cylinder Oil Seal Ring Kit for Carter E320B Excavator $49.69 |
|
|
Hydraulic Ajusta Buckets sales literature excavator $9.00 |
|
|
Repalcement Bucket Cylinder Oil Seal Kit for Hitachi EX200-5 Excavator $48.95 |
|
|
Replacement Bucket Cylinder Oil Seal Ring Kit for Carter E320B Excavator $50.02 |
|
|
Repalcement Bucket Cylinder Oil Seal Kit for Komatsu PC200-6 Excavator $49.92 |
|
|
Repair Bucket Cylinder Oil Seal Ring Set for Hitachi EX200-5 Excavator $49.12 |
|
|
2 – 12″ Personalized Excavator Drought Thumb Bucket Grapple Decals 510R $29.95 |
|
|
Caterpillar Excavator Bucket Tooth (IU3202) * NEW * OEM * $14.98 |
|
|
36″ Heavy-duty Rock Bucket for a Komatsu PC300 Excavator – V Bottom / Frost $4,500.00 |
|
|
32″ Heavy-duty Rock Bucket for a Komatsu PC300 Excavator – V Bottom / Frost $4,500.00 |
|
|
52″ Bucket for Caterpillar/Cat 225 Excavator $1,600.00 |
|
|
Repalcement Bucket Cylinder Oil Seal Kit for Komatsu PC200-6 Excavator $50.40 |
|
|
2008 VOLVO EC210cl HYDRAULIC EXCAVATOR TRACKHOE HAMMER 3 BUCKETS BACKHOE GD $136,000.00 |
|
|
68493-91040 New Kubota Excavator Bucket Cylinder Seal Kit KH-191 Rod & Bore $46.99 |
|
|
Repalcement Bucket Cylinder Oil Seal Kit for Hitachi EX200-5 Excavator $49.12 |
|
|
USED BOBCAT QUICK EXCHANGE MINI-EXCAVATOR BUCKET! 52″ DITCHING BUCKET $949.99 |
|
|
Caterpillar 225 Hydraulic Excavator Hoe (2) Buckets CAT NR Rebuilt Pump $3,050.00 |